Introducing AO Scan Technology

---

Your inner voice report will show you the 3 frequencies (notes) that need to be diminished because they are in excess and the one frequency that is lacking or deficient. These four notes appear across the top of the colored boxes at the top of your report. You can also view them in graph form. The first three are the frequencies in excess and the fourth one is the deficient frequency.  Descriptions of the emotional energies that are tied to these frequencies are explained further down on the report. The frequencies (or notes) in the colored boxes are the frequencies that you need to balance those that are out of range. Just so you are aware, It is possible that one of the frequencies that you need is also one that has been identified as being out of balance. 

You will see an option that says pulse tones or classic tones towards the top of the report. Classic tones is an older version of this program that is being phased out so keep "pulse tones" selected. You will also notice 4 pink boxes. It is not necessary to change any of these settings but you can adjust them to your preference. The box on the top left is the rhythm of the note pattern that you will here. For example, Tesla 3-6-9 will play the tones for 3 seconds, then pause, 6 seconds, then pause, then 9 seconds and repeat. The button on the bottom left is the musical selections that plays over the pulsed tones to make it more soothing and enjoyable to listen to.  It is the pulsed tones "underneath" the music that is balancing the frequencies that were found to be out of range. The pink button on the top right is the type of sound wave and the button on the bottom right is the octave (pitch) of the tones you will here. You can adjust this to be a lower or higher pitch based on your preference. One is not better than another. You will also notice 2 volume bars in blue. The volume bar on the left controls the music and the volume bar on the right controls the volume of the pulsed tones. You can adjust these to your liking but be advised not to turn down the volume on the pulsed tones too low. It does not need to be loud but it does need to be heard in the background. 

Using a bone transducer head set (if you have one) or ear phones, select the 'pulse cycle' option to listen to the tones for 5 min, 10 min or continuously play them. Five minutes is typically sufficient to balance frequencies.  Listen to the audio track 2-3 times a day for approximately 4 days. If you have Lightwave glasses, the report will also instruct you on which ones to wear throughout the day to further enhance your frequency balancing. 

The focus of the AO Scan technology is education. It is not intended to diagnose, treat or cure any condition or disease. These scans are taking a snapshot of your energetic self at a specific point in time therefore many factors will affect the results that you see on your scan. For example, if your bladder happens to be full when the scan is taken, your bladder may come up as imbalanced. If you are dehydrated, this will also affect the results of the scan. Whatever you happened to eat prior to the scan will sometimes adversely affect the results as your body works to digest it. According to diurnal cycles (natural cycles of the body) the liver is most active at detoxing the body between 1 and 3 am therefore a scan taken at this time would be different than a scan taken midday with respect to the liver. It is not advised to draw any conclusions from the results of one scan.  It is when multiple scans are taken over time that you will be able to start noticing patterns of various aspects of the body that are continually coming up imbalanced. When you notice these patterns, this information can then be used to direct you on a course of action, such as seeing a health care practitioner that can help guide you with possible pathways to wellness. 

If you are new to AO Scan technology, you may want to start with the 'classic ' report which simply shows whether or not a particular item is in or out of optimal range. The 'enhanced' report provides more specific numerical values that give more information regarding the current energetic state of that item. A numerical value of 4-5-6 indicates values that are considered optimal.  A value of 1-2-3 indicates sub-optimal functioning . It could also mean that the item scanned could be an energetically chronic situation. A value of 7-8-9 indicates an overactive state of inflammation which is more acute in nature. 

There are two steps when using the Vitals, Comprehensive or Body System scans. Phase one involves scanning the body to analyze its current energetic state. Phase two involves optimizing frequencies (balancing frequencies) that are sent back to the body to 'nudge' the body back to a state of balance or homeostasis.  The column labeled 'previous scan' was the reading before optimization was performed. The column labeled 'current scan' is the reading after optimization. 

It is possible that a value will be less optimal after the optimization is finished. Although this is not something we may consciously want, we trust the body knows what it needs as it may need to, in essence "borrow" energy from one area to help another area  more in need. 

This technology is not meant to diagnose allergies. With that said, if a value appears in the sub-optimal range, it does not necessarily mean that you are allergic to it.  It can simply mean that your body has to work a bit harder to digest it or it could mean that you may want to take a break from that food or nutrient for a period of time.  For example, if you eat 2 apples everyday for a week, the scan may show an imbalance with apples. This doesn't mean you are now allergic. Maybe just take a break from apples.